Alpha Technologies DCX3000 Spécifications télécharger pdf (Page 10)

041-028-B0-003, Rev. C

3.0 Battery Cable Connections

3.1 Enclosures with Generator Access Door

Tools and Materials Needed:

• Portable Generator Battery Cable Kit

• DC Multimeter

Procedure:

1. Open the enclosure’s battery compartment and locate the battery pack connections for

the positive and negative battery cables leading to the power supply.

2. Observing polarity (red to positive, black to negative), connect the Battery Pack

Adapter Cable to the connections located in Step 1. Attach Ring Lug or Alligator Clamp

connections directly to the battery post. See Fig. 3-5 and Fig. 3-6 for Novus-style and Y-

style connections. Do not connect the extension cable to the DC OUT jack on the

front panel of the generator at this time.

3. Route the extension cable (10’, 30’, or 50’) into the enclosure’s battery compartment.

Protect cable from chaﬁ ng against sharp edges.

4. Connect the Battery Pack Adapter Cable to the extension cable. Extension cables are

equipped with in-line fuses. Replace only with 100 Amp 300VAC fuse (Alpha P/N 460-

191-10).

Fig. 3-1, Generator Access Door and Battery Pack Adapter Cable

Inspect cable sets before each use for damage and wear. Use only cable sets that are designed for

this generator.

CAUTION!

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Pas de commentaire

Alpha Technologies DCX3000 Spécifications Page 10