Alpha-technologies Serial System Controller Manuel d'utilisateur télécharger pdf (Page 25)

2. Installation

25 018-332-C0-002 Rev. B

Figure 2-3; Inverter Module with SSC Installed

SSC Installation Procedure:

1. Carefully align the 2x9 header plastic standoffs of the SSC card

to the IM, and position the board over the two nylon standoffs.

2. Reattach with the 2 screws from the existing COMM module.

3. Slide the IM into the chassis.

4. Plug the Tamper, ECM, BATT, DATA I/O, and RS-485 (internal/

external), cables into their respective connectors.

5. Plug in the XM2 Battery Connector and turn ON the Battery

Breaker.

6. The XM2 and SSC will begin their initialization sequence.

2.2 SSC Installation

1 2 ... 20 21 22 23 24 25 26 27 28 29 30

Pas de commentaire

Alpha-technologies Serial System Controller Manuel d'utilisateur Page 25